On my Hawkeye the choke will not stay at the position I set it at. When I pull it all the way out, it will slowly fall back down to about 1/3 out. The choke knob on the hawkeye is more vertical than the choke on the sportsman which pulls out horizontally.

What I want to know is how can I adjust, or can I adjust, the choke cable so that the choke stays where I put it?

Thanks.

wow, don't have a clue on that other than looking ay both ends of the cable housing to see if there is any adj. available, or possibly rerouting the cable assembly itself.....stroker

On your choke knob Pull out the chock at he base there is a rubber boot, Lift it towards the back of the pulled out chock knob It was covering a black plastic adjuster it adjusts the tension on the slide turn it right for titer and left for looser U want to tightin it up.

Hope this helps

Superly

Superfly,

THANKS! That was a very quick and easy fix.